What's This For?

• Universal! Will fit 6-32 and 4mm posts (except Bacchus guitars)
• Use directly with ABR-1 bridge posts on Historics
• Use on any Gibson® with 6-32 bridge posts (not Nashville)
• For Nashville Bridge System
  
  equipped guitars, Faber® BSWKIT™, iNsert™, or NSWKIT™ is required
• For most Epiphone and many other non U.S.A. manufactured guitars using a bridge system with large body inserts
  
  , the Faber® E-Sert™ is required
• If you need Faber® bridge studs, you may order them here with the Tone-Lock™ bridge and save 5% off the regular price of the bridge studs!
• Other Options: Non Pre-Notched Saddles
  All Faber® bridges have “Pre-Notched” saddles with small starter notches as standard. We will replace the standard saddles with Non Pre-Notched saddles if this option is chosen.
  & the Faber® HYBRIDge™ Option
  This option replaces the nickel plated brass or natural brass saddles (depending upon the standard saddles for the bridge you are ordering) for the wound E-A-D strings with TITANIUM saddles. Using titanium gets rids of the muddiness that can sometimes occur on the lower strings. Combined with the warmth of traditional brass saddles for the plain strings, the HYBRIDge™ Option creates a more balanced, focused tone for your guitar! Photo shows HYBRIDge™ option on a #3033 Tone-Lock™ Bridge.

  

• Tone-Lock™ Bridge
  
  Alloy: 70% zinc, 30% aluminum
  Net Weight, including lock nuts:

  • with brass saddles – 1.755 oz./49.75g
  • with titanium saddles – 1.665 oz./47.2g

  Length: 3.31″/84.1mm
  Saddle radius: 12″
  Post spacing: 2.91″/74.0mm (0.8mm lock nut clearance to accommodate 73.6mm-74.4mm post spacing)
  Post hole diameter (stepped): upper, .293″/7.45mm; lower, .2165″/5.5mm
  String Spread (center-to-center, outer saddles): 2-1/16″/2.0625″/52.39mm